Step-by-Step Cleaning Process:
- Remove the Aerator:
Unscrew the mesh aerator from the tap using an adjustable wrench. The aerator helps regulate water flow and acts as a filter. - Prepare the Cleaning Solution:
- Place the aerator in a small container.
- Sprinkle a couple of teaspoons of citric acid over the aerator.
- Pour boiling water into the container and stir to dissolve the citric acid. The reaction will start immediately, with gas bubbles forming and water stone particles loosening.
- Cleaning Action:
- Allow the aerator to soak in the solution for about 5 minutes. You may cover the container partially to retain heat and aid the cleaning process.
- After 5 minutes, you will notice the water stone flakes detaching from the aerator. Gently assist the process with a knife if needed.
- Final Steps:
- Once cleaned, reinstall the aerator back into the tap.
- Test the water flow to ensure it is smooth and free from splashing.
Continued on next page…
